Need cal. Euro EP3 Type-R DC5 cams, RBC,Comptech Icebox...

sass · Post by **sass** » Mon Jul 04, 2011 1:38 am

What's your opinion?

Vteс not work well.
log7000

Mose-r · Post by **Mose-r** » Mon Jul 04, 2011 10:40 am

sass wrote:
What's your opinion?
Vteс not work well

Thank you very much!!
Ignitions are ok?

sass · Post by **sass** » Mon Jul 04, 2011 1:58 pm

Mose-r wrote:
sass wrote:
What's your opinion?
Vteс not work well
Thank you very much!!
Ignitions are ok?

log 3800 4800 Ignitions ok.

Aerozz · Post by **Aerozz** » Tue Aug 09, 2011 2:37 pm

somebody can check my calibration, thanks

rikitaun · Post by **rikitaun** » Thu Aug 11, 2011 12:13 pm

Mose-r wrote:Here's the news from the same car:
Kpro serial:1045
Kmanager version:1.5.1.0
K20A2 European Civic Type-R (EP3)
37820-PRB-A06 ECU
ITR cams,ITR header,RBC manifold,Comptech Ice box,Magnaflow 2.5 exhaust
here's my kal:progi
and datalogs:vtec 3800,4800,7000
and my dyno's graph:honda civic 110701.jpg (with 4900 vtec point)

What's your opinion?
Thanks for advance:
Karoly

your A/F it's too rich... see your log <12.50 from 6.000 to 8.500 reduce it to 12.7-12.9
and VTC degrees I think its too agressive... in this range of Rpm.

I made an EP3-K20A (japan engine) in Spain with PRB and GruppeM and obtain 238hp.

check it...

apiegapie · Post by **apiegapie** » Fri Aug 12, 2011 4:55 am

every dyno is different, also think about that!

Hondata

Need cal. Euro EP3 Type-R DC5 cams, RBC,Comptech Icebox...

Re: Need cal. Euro EP3 Type-R DC5 cams, RBC,Comptech Icebox.

Re: Need cal. Euro EP3 Type-R DC5 cams, RBC,Comptech Icebox.

Re: Need cal. Euro EP3 Type-R DC5 cams, RBC,Comptech Icebox.

Re: Need cal. Euro EP3 Type-R DC5 cams, RBC,Comptech Icebox.

Re: Need cal. Euro EP3 Type-R DC5 cams, RBC,Comptech Icebox.

Re: Need cal. Euro EP3 Type-R DC5 cams, RBC,Comptech Icebox.