D17 Adjustable Cam Gear Installation

K-Series Programmable ECU installation questions / support issues
Post Reply
speedyangie
Posts: 2
Joined: Tue Jun 21, 2011 9:39 am

D17 Adjustable Cam Gear Installation

Post by speedyangie »

Anyone have the instructions for the installation?
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: D17 Adjustable Cam Gear Installation

Post by Spunkster »

Use the factory service manual.
speedyangie
Posts: 2
Joined: Tue Jun 21, 2011 9:39 am

Re: D17 Adjustable Cam Gear Installation

Post by speedyangie »

I don't have one. It's a customer's car. I installed everything and it was great - made great power after tuning. This is the second go-around because the car overheated and I just finished re-doing the head. Now, the car starts and then dies after running for about three seconds.

Checked the following already - fuel pump, spark, cam sensor, timing, cleared security setting and re-uploaded the tuned map...
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: D17 Adjustable Cam Gear Installation

Post by Spunkster »

Check all the wiring that has been touched while workign on the car, and make sure that the cam is installed properly at TDC.
Post Reply