Need cal. Euro EP3 Type-R DC5 cams, RBC,Comptech Icebox...

[hondagyk]

Hi all!
Please help me some cal files,
My car spec is:
K20A2
Honda Civic Type-R 30th Anniversary /EUDM EP3/
Honda Integra Type-R camshafts /JDM DC5/
Honda Accord Euro-R Intake manifold /JDM CL7/
Comptech IceBox
DC5 Exhaust header 4-2-1, mangaflow catback /no cat/
PRB K-Pro
Thanks!

[keto06]

load up the k20a-itr kal, do a 3rd gear pull from 2k-redline and post the datalog on this page.

[hondagyk]

load up the k20a-itr kal, do a 3rd gear pull from 2k-redline and post the datalog on this page.

Ok, I will do it tomorrow! Thanks

[keto06]

where are you located and whats the fuel like out there?

[hondagyk]

I'm live in Hungary. The fuel what I can use is: normal 95, premium 95, and (Mol)99 or (OMW,Shell) 100 octane. / I can use E85 bioEthanol too, but i prefer normal fuel /
So Please inform me which is the best choice! Thank You!

[keto06]

either premium 95 or 99/100. I dont know what the price difference is...its whatever you would prefer to use daily.

[hondagyk]

either premium 95 or 99/100. I dont know what the price difference is...its whatever you would prefer to use daily.

Thank You for the fast answer! Tomorow i will send the datalog...
Thanks

[hondagyk]

Here is the datalog/cali files
I tried out two .kal files:
K20A-ITR , and k20a2-rsx-310cc-itrcams-jrhdr ...
I felt the K20A-ITR was better.So please inform me what i need to do. Thanks

[keto06]

Didnt get much time on this but im going out of town and wanted to get you a new kal. (made with newest version of KPRO)

GO!

[hondagyk]

Didnt get much time on this but im going out of town and wanted to get you a new kal. (made with newest version of KPRO)

GO!

Thank You a lot! I will try it out! Amd inform you with the results.Thanks

[rikitaun]

Didnt get much time on this but im going out of town and wanted to get you a new kal. (made with newest version of KPRO)

GO!

Thank You a lot! I will try it out! Amd inform you with the results.Thanks

be carefull !!! goto VTEC tab and check " VTEC Oil pressure switch enabled"

your engine is K20a2 and this kal it's for k20a

[keto06]

be carefull !!! goto VTEC tab and check " VTEC Oil pressure switch enabled"

your engine is K20a2 and this kal it's for k20a

good point...though you got me excited for an update.

[hondagyk]

be carefull !!! goto VTEC tab and check " VTEC Oil pressure switch enabled"

your engine is K20a2 and this kal it's for k20a

good point...though you got me excited for an update.

Oh thanks I switch enable the VTEC Oil pressure switch.
Here is my datalog

[keto06]

no offense man, but i cant do anything with that log. Part throttle and you have closed loop enabled.

Get me a long datalog 20 minutes or more in OPEN LOOP (closed loop unchecked) or get me a FULL THROTTLE 3rd gear pull again.

Cruise log will most likely be too big, so upload to speedshare.com or something equivalent.

[Mose-r]

Here's the news from the same car:
Kpro serial:1045
Kmanager version:1.5.1.0
K20A2 European Civic Type-R (EP3)
37820-PRB-A06 ECU
ITR cams,ITR header,RBC manifold,Comptech Ice box,Magnaflow 2.5 exhaust
here's my kal:progi
and datalogs:vtec 3800,4800,7000
and my dyno's graph:honda civic 110701.jpg (with 4900 vtec point)

What's your opinion?
Thanks for advance:
Karoly