Knock sensor Raw voltage

s300 and SManager software questions & answers
Post Reply
Touge Master
Posts: 31
Joined: Thu Sep 10, 2009 11:08 am

Knock sensor Raw voltage

Post by Touge Master »

Hi there,

I'm tuning a S300 for a friend. Is installed on a P30 board so it don't have knock control.
Despite of that, i was wondering if it is possible to wire the knock sensor to a spare 0-5v input to see/datalog the raw voltage it produces as a resonant-type one.

Regards.
Kouzan Racing Engineering
Top
User avatar
Spunkster
Site Admin
Posts: 23887
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Knock sensor Raw voltage

Post by Spunkster »

No, this is not possible.
Top
Johnny_9
Posts: 312
Joined: Sun Apr 09, 2006 5:12 am

Re: Knock sensor Raw voltage

Post by Johnny_9 »

Touge Master wrote:Hi there,

I'm tuning a S300 for a friend. Is installed on a P30 board so it don't have knock control.
Despite of that, i was wondering if it is possible to wire the knock sensor to a spare 0-5v input to see/datalog the raw voltage it produces as a resonant-type one.

Regards.
buy an after knock box which has 0-5v analogue out
Top
Post Reply

Return to “s300 / SManager”