Stall at 5000rpm

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
VTiSpec
Posts: 14
Joined: Fri May 20, 2011 5:11 pm

Stall at 5000rpm

Post by VTiSpec »

when I hit the pedal fast to WOT engine will go to around 5k rpm and stalls. If I hit it progressively it goes all the way up to 8k or more. it does that stationary and rolling.
I did datalogged it, but i forgot to saved it, anyway what called my attention, duty and inj were 0, but tps was around 85 as well as rpm 4800.
User avatar
Spunkster
Site Admin
Posts: 23884
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Stall at 5000rpm

Post by Spunkster »

You need to post the calibration and a datalog showing the problem.
VTiSpec
Posts: 14
Joined: Fri May 20, 2011 5:11 pm

Re: Stall at 5000rpm

Post by VTiSpec »

I have to do that tomorrow afternoon, in the meantime I forgot to add that afterward I disabled "Lean Protection 1" and tested ok stationary, but rolling when I change gear engine stalled.
VTiSpec
Posts: 14
Joined: Fri May 20, 2011 5:11 pm

Re: Stall at 5000rpm

Post by VTiSpec »

attached calibration, I don't see the need to send datalog since it does not stall anymore. Engine hesitates when shifting gear (as I mentioned in my last post). this is a race car.

thanks,
You do not have the required permissions to view the files attached to this post.
VTiSpec
Posts: 14
Joined: Fri May 20, 2011 5:11 pm

Re: Stall at 5000rpm

Post by VTiSpec »

additionally,
B16A2 engine
83mm bore pistons
type R head
310cc injectors
stock cams

do you still want a datalog during shifting?
Post Reply