Hey!
Got a p28 and a s300 i bought a while ago. When i was going to start the car last week with the s300 in the p28 it runed on a very high load of fuel and a very low idel. So i opened the box, took out the s300 and cut the J1 jumper and tryed to start the car again and it was the same problem. Anyone had the same problem? Bad ecu? Got constant engine light and red diode light from the ECU.
p28 with s300 problem
Re: p28 with s300 problem
Have you tried uploading a calibration to the s300?
Re: p28 with s300 problem
Yes it uploads perfect and the SManger says "online".Spunkster wrote:Have you tried uploading a calibration to the s300?
Re: p28 with s300 problem
From Help, About, what version of software are you using?
Re: p28 with s300 problem
The latest one, downloaded it today.Spunkster wrote:From Help, About, what version of software are you using?
Re: p28 with s300 problem
that does not tell me the version number
Re: p28 with s300 problem
1.4.8.0Spunkster wrote:that does not tell me the version number
Re: p28 with s300 problem
There are more recent beta version of software available in the downloads section of our website. If the ECU is not working in stock configuration then it is either a faulty ECU or there is a problem with the socketing of the ECU.