k20z1,piston 86.5, 12:5.1, skunk 2 stage 3 cams, fuel injectors 650, throttle body 70 mm, typer intake, header toda 4-2-1 "2.5", ported and polish head, skunk springs, titanium retainers.
guys i posted here the .kal that im using now so i would know if you could help me to change parameters if they are in error or if you know that can be better please help me please somebody , and guys please tell me if i go with the vtc to 50 degrees i have no problem cuz the valves not encounter to the piston i did measurements that what i tell that valves dont encounter the piston but i dont know if its correctly or good to the engine use vtc advancement to full degrees how i did on the calibration please i need you to help me guys!
please help me with kpro kal cams skunk2 stage 3
-
carlosracing
- Posts: 2
- Joined: Sat Apr 16, 2011 1:22 pm
please help me with kpro kal cams skunk2 stage 3
You do not have the required permissions to view the files attached to this post.