phearable.net basemap rich idle/lean wot..

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
ldbriggins
Posts: 63
Joined: Sun Oct 03, 2010 6:48 am
Location: Birmingham, Alabama

Post by ldbriggins »

what do you mean it wont run on all 4 cylinders? how are diagnosing it runing on all 4 cylinders.. is it cranking and dying or just turning over? if its just turning over take out some fuel and change your plugs they maybe going bad, if it cranks then dies check your wideband to see if a/f is around 13.3 while warming up.. hope this helps i made 400hp of this basemap with a little snooping around and clearing things up
'Boom, Dunnit'
Post Reply