s300 problem

turboacurab20 · Post by **turboacurab20** » Thu Mar 17, 2011 1:01 am

does anyone have a basemap of the itr sc61 turbo basemap with 1000cc injectors and hondata 4 bar map sensor ? or know what i need to do to tune the ecu for the injectors? do i just need to adjust fuel trim or do i need to add or subtract fuel in fuel tables? thanks for any help

Luke · Post by **Luke** » Thu Mar 17, 2011 2:13 am

you have to change the dead times for your injectors and get it tuned with a wideband. otherwise it won't work!

best regards Lukas

lowblow · Post by **lowblow** » Thu Mar 17, 2011 9:50 am

what kind a injector,piston bore,comp ratio???

turboacurab20 · Post by **turboacurab20** » Fri Mar 18, 2011 1:47 am

lowblow wrote:what kind a injector,piston bore,comp ratio???

bosch injector dynamic 1000cc injectos cp 9.4-1 , 81.5 mm bore

turboacurab20 · Post by **turboacurab20** » Fri Mar 18, 2011 1:49 am

Luke wrote:you have to change the dead times for your injectors and get it tuned with a wideband. otherwise it won't work!

best regards Lukas

what id dead times and where is the adjustment for it i dont see it i have a wideband and im idleing super lean and stalling out then rev up motor and it goes rich and bogs and only revs to 3500 rpm then its like rev limiter must be some sort of safety feature??

AREA876 · Post by **AREA876** » Fri Mar 18, 2011 6:25 am

Post current calibration and a datalog at idle

lowblow · Post by **lowblow** » Fri Mar 18, 2011 9:15 am

I'm using this CAL for now! every motor have different set up..SO! use this with your own risk..Tune for 7lbs boost..Take it easy,,let me know if CAL comfortable with your motor..always monitor AFR gauge when TUNING..

turboacurab20 · Post by **turboacurab20** » Fri Mar 18, 2011 11:39 am

lowblow wrote:I'm using this CAL for now! every motor have different set up..SO! use this with your own risk..Tune for 7lbs boost..Take it easy,,let me know if CAL comfortable with your motor..always monitor AFR gauge when TUNING..

u using injector dynamic 1000cc injectors? hondata 4 bar map ? thanks

turboacurab20 · Post by **turboacurab20** » Fri Mar 18, 2011 5:55 pm

lowblow wrote:I'm using this CAL for now! every motor have different set up..SO! use this with your own risk..Tune for 7lbs boost..Take it easy,,let me know if CAL comfortable with your motor..always monitor AFR gauge when TUNING..

it runs thanks but if anyone else has a base map for 1000cc injectors and hondata 4bar for b18c9.4-1 compression 7 psi 70 trim turbo post it up thanks

lowblow · Post by **lowblow** » Fri Mar 18, 2011 6:57 pm

How's your motor runing? That is base CAL just to start, you have to bring your car to the DYNO tune...

turboacurab20 · Post by **turboacurab20** » Fri Mar 18, 2011 8:14 pm

lowblow wrote:How's your motor runing? That is base CAL just to start, you have to bring your car to the DYNO tune...

running ok yeah im waiting on dyno tune but id like to learn more about the s300 system just incase i want to make minor adjustments