Info on Accord 95-01

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
fjartjdm
Posts: 14
Joined: Wed May 19, 2010 2:25 pm

Info on Accord 95-01

Post by fjartjdm »

I need a base map for a jdm accord swap 95-01 f22 or f23. Im looking for a base map for a SOHC VTEC map or what base map could i use.
danyo655
Posts: 30
Joined: Tue Jan 25, 2011 6:31 pm

Re: Info on Accord 95-01

Post by danyo655 »

fjartjdm wrote:I need a base map for a jdm accord swap 95-01 f22 or f23. Im looking for a base map for a SOHC VTEC map or what base map could i use.
understand that f22 and f23 are 98% similar, but different compression ratios. so an f22 base will be too lean, i know cause i ran a stock f23 with a stock f22 calib, and boom goes the eng and pistons are fried, didnt think they were different CR's. i have a decent calib for a completely stock f23 with minor stuff like catback, CAI. if you use this set the rev limiter back to 6500. for safety reasons. and the accord gens are not 95-01 for engines, its 94-97 for f22's and 98-01 for f23's. good luck, use at own risk, works well on my stock f23 beater engine, waitin on the f20b to be finished
You do not have the required permissions to view the files attached to this post.
Post Reply