Decrease INJ below Red...(10.00)

kornshadow097 · Post by **kornshadow097** » Mon Feb 21, 2011 2:48 am

Anyone Know how to decrease the INJ phase? Is it just increasing fuel in the duty?

Or is there another method?

Post by **Spunkster** » Mon Feb 21, 2011 10:50 am

You are going to have to be much more spcific as I don't understand your question.

kornshadow097 · Post by **kornshadow097** » Mon Feb 21, 2011 12:39 pm

In the k pro software for my data logs, I get my INJ value above 10(ms) and it turns red which I assume is bad.

My question is how do I lower the inj phase duration?

Post by **Spunkster** » Mon Feb 21, 2011 12:59 pm

That is a display setting you can set it to whatever color or setting you want.

If you are maxing out your injectors then you need larger injectors.

kornshadow097 · Post by **kornshadow097** » Mon Feb 21, 2011 7:17 pm

I read under the help menu on the k-pro software it says I only need larger injectors if the duty is close to 100% and so far I barely hit like 70%. the INJ (ms) is the one turning red..im guessing its a bad thing?... or is it not?

Post by **Spunkster** » Tue Feb 22, 2011 10:40 am

Don't worry about the color. It is something that you can set to whatever you want.

kornshadow097 · Post by **kornshadow097** » Fri Feb 25, 2011 1:15 am

Alright, I'll just ignore the Red numbers then.

Thanks