car vibrates running lean or ignition?

remus · Post by **remus** » Fri Jan 28, 2011 5:04 pm

I just re installed my engine into my acura tsx we installed supertech full valves, springs and IPS k2 cams. The vibrations I am experiencing is between 1000 rpm and 3500 rpm after that the engine run's smooth and vibration disappears.

It was dyno tuned.

I will post the tune online tomorrow for you guys to have a look at.

On first thought can it be fuel running too lean or the ignition is wrong?

Thanks for your help, i will post up the tune tomorrow as it is on my laptop.

remus · Post by **remus** » Sun Jan 30, 2011 8:02 pm

I did not do any run's yet. Here in Montreal Canada it's still well below zero degrees. If I need to do it just let me know, i will do whatever is necessary in order to try something.

Thank.

remus · Post by **remus** » Tue Feb 01, 2011 7:12 pm

We used a dynapak theses are the numbers we got:

190 WTQ.
231 WHP.

remus · Post by **remus** » Sun Feb 06, 2011 9:51 am

Tough one guys, anything wrong with the tune?

Thanks

Hondata

car vibrates running lean or ignition?

car vibrates running lean or ignition?

Here is the tune

Here are my dyno numbers.

Any luck?