Wideband input

[Gijs]

Hey people,

I have a strange problem, I hooked up my wideband (Innovate LC-1) to my car.

I set the two analog outputs the same, both:
- 0 V = 7.35 AFR
- 5 V = 22.39 AFR
like the default settings for the gauge.

Now I can get it right in Kpro with a voltage offset of 0.58 when running stationary, but once at WOT the readings on the Logworks are like 1 AFR off of what I get in hondata.

I don't get why it's okay when running idle and why it's not the same anymore when running.

Any thoughts ?

Thx,
Gijs

[Floppie]

It's possible that the scale is incorrect for the ECU. Have you tried enriching/leaning your idle to make sure it works for all AFRs?