Broken K-Pro Cause Damage to Car?

Yahoo · Post by **Yahoo** » Sat Aug 28, 2010 10:21 pm

Long story short, I bought an 02-04 K-Pro and was going to get it converted to an 05-06 K-Pro for my Type-S. Sent it in to Hondata, they replied stating that the K-Pro didn't work and it would cost $100 for diagnosis.

I still want to test the K-Pro on a friends 02-04 Type-S, but I am wondering if there will be any harm that could become of this?

The serial number on the K-Pro board is 05000189.

If you need any additional information/pictures please let me know and I can post it up as soon as possible. Any other suggestions are welcome.

Thanks.

Post by **Spunkster** » Mon Aug 30, 2010 12:54 pm

When did you send this in and who did you speak to?

Yahoo · Post by **Yahoo** » Tue Aug 31, 2010 5:43 am

I believe it was Mike, and it was awhile back, maybe in April.

Post by **Spunkster** » Tue Aug 31, 2010 10:19 am

What dealer did you go through for this?

Yahoo · Post by **Yahoo** » Tue Aug 31, 2010 12:21 pm

I bought it off someone local.

Yahoo · Post by **Yahoo** » Wed Sep 01, 2010 2:14 pm

If I plug it into the car, how would I be able to tell if it works or not?

Floppie · Post by **Floppie** » Wed Sep 01, 2010 4:43 pm

Even without being in the car, or being in the car with no power, if you plug the ECU into the laptop via USB the little info option should become available in KManager. The blue i next to the connect/datalog buttons on the toolbar - these two, naturally, should NOT light up if there's no car power going to it.

Yahoo · Post by **Yahoo** » Thu Sep 02, 2010 5:18 am

Ok so I plugged it into my computer and it recognized it. I clicked the information icon and this is what it gave me.

Where could I find a 02-04 base map that I could load on to the K-Pro so I can try to use it on my friends RSX?

Is there some hope left?

Thanks for all the help, please let me know if you need any additional information.

Floppie · Post by **Floppie** » Fri Sep 03, 2010 9:36 am

KManager comes with a ton of base maps - including one for a stock 02-04 that worked great when I had to return my car to stock temporarily

Yahoo · Post by **Yahoo** » Wed Sep 08, 2010 1:48 pm

Ok so I plugged my K-Pro into my friends RSX and the car starts up. The problem is that I can't do a datalog or upload a calibration. On the bottom left of K manager, it says online but even when the car is on it says Ignition off. Any ideas? What's going on?

Post by **Spunkster** » Wed Sep 08, 2010 2:53 pm

Yahoo wrote:Long story short, I bought an 02-04 K-Pro and was going to get it converted to an 05-06 K-Pro for my Type-S. Sent it in to Hondata, they replied stating that the K-Pro didn't work and it would cost $100 for diagnosis.

Yahoo · Post by **Yahoo** » Thu Sep 09, 2010 12:17 pm

Spunkster, would you be able to tell if the ECU is a reflash by the serial number?

Post by **Spunkster** » Thu Sep 09, 2010 12:38 pm

It has a K-Pro, not a reflash.

Broken K-Pro Cause Damage to Car?

Broken K-Pro Cause Damage to Car?

Re: Broken K-Pro Cause Damage to Car?