ISSUE #1
Last night I updated my laptop with the newest 1.1.6.1 bata version, it asked me to update the FP's fw to 22 as normal, but now when I do a datalog using the FP alone by passing the Datalog button it shows blank when I replay it in the FP software on my laptop. I tried the official release and the same thing happens.
ISSUE #2
And also with the offical and the beta after downloading the logs from FP some are compressed and some are not. a 40mins drive = 7MB at times and other times it's like 5-600kb's not even a mb.
Somethings to look into!
-V1.1.5.6 and also V1.1.6.1 beta
-2008 Si
-Serial number, not sure if I should post it here
-Cali is your CT-E Stage2 MAP
When posting a FlashPro problem with your vehicle, please include:
- serial number of your FlashPro
- FlashPro Manager version (not 'the latest')
- the calibration (as an attachment)
- a datalog of a problem (as an attachment)
- what sort of vehicle you have
- what sort of ECU you are using
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).
- a specific description of the problem
Most of the recent posts leave out information pertinent to solving the problem.
Dataloging error with 1.1.6.1 beta
Dataloging error with 1.1.6.1 beta
You do not have the required permissions to view the files attached to this post.