Hey guys, I thought I would be fine with putting in the 1000cc and 3bar map sensor and return line but now it's leaning hard! When I put 650cc and 3bar on my bseries before I didn't have too much trouble. Please help!
k20z1
Peakboost GT3076 kit
RBC intake manifold
Bosch/Injector Dynamics 1000cc high impedence injectors
GM 3bar map sensor
Aeromotive FPR set at 50psi without vacuum line on.. idles at 40psi with vacuum on
Walbro 255hp
Return line
In need of a basemap =) k20z1 1000cc 3bar map, rbc, gt30
-
steadymethodz
- Posts: 6
- Joined: Wed May 28, 2008 2:18 pm