HELP, request for someone to look at my datalog

Cha27se · Post by **Cha27se** » Fri Mar 12, 2010 12:00 pm

ok, warmed up the car dataloging, drove around a little, then did a pull, i forgot to keep it running after that. If you need me to do another i will. The car is really feeling good. Seems like the power band is getting way smoother and pulling really hard top end

here it is http://www.speedyshare.com/files/213919 ... ng_run.kdl

keto06 · Post by **keto06** » Sat Mar 13, 2010 1:20 am

Did you switch back to the old kal?

Cha27se · Post by **Cha27se** » Sat Mar 13, 2010 1:47 am

no that was the latest one you sent me

keto06 · Post by **keto06** » Sat Mar 13, 2010 12:51 pm

Here is the WOT pull from the datalog above. It clearly shows that the old tune was somehow used. I dont know how things got mixed up, but this isnt the RBC tune, clearly.

Cha27se · Post by **Cha27se** » Sat Mar 13, 2010 1:55 pm

haha ok, im confused. which kal do you want me to try? do you need me to do another warm up drive around datalog?

keto06 · Post by **keto06** » Sat Mar 13, 2010 2:52 pm

heres the deal.

I will tune whichever map in your mind feels the best. If you want me to tune the RBC kal, I will. If you like the one i made better, thats fine, its your car, so whichever one feels best to you, thats the one I want you to pick, but I cant keep switching around.

Even if you wanted me to start over on a completely different kal, I would, but I need to know because had I not noticed you really coulda messed something up.

The RBC kal is more made for z1's with a race header and RBC, but if it feels good, go for it.

The one I made is a kal for a generic z1 but might not work as well with the RBC. When it comes to cam angles, you really dont know unless you are on a dyno.

Pick a kal. Do another log just like the one you did (except try and get 2 3rd gear pulls if you can) and we will go from there.

Tim

Cha27se · Post by **Cha27se** » Sat Mar 13, 2010 7:19 pm

ok cool well not sure how that got all mixed up but i made another run, i hope this is the right one....http://www.speedyshare.com/files/21415565/long_run.kdl

Cha27se · Post by **Cha27se** » Sun Mar 14, 2010 10:29 am

keto06 · Post by **keto06** » Sun Mar 14, 2010 1:12 pm

Cha27se wrote:Bump

LOL impatient much?

Just checking...this was made with the most recent RBC kal correct?

Cha27se · Post by **Cha27se** » Sun Mar 14, 2010 1:34 pm

Haha sorry I was antsy, that is the second calibration back. I kept doin pulls on just the most recent calibration you sent me, and somehow things got mixed up. I went two tunes back and decided to go from there. Sorry if this causes any back tracking. Whichever tune you post I'll run. I don't know much about how which tune is best for me haha

keto06 · Post by **keto06** » Sun Mar 14, 2010 11:47 pm

just post the kal you use every time you post a log. makes things easier. Also, when you say 2 kals back, i assume you mean the march 11th RBC kal and NOT the march 12th one?

Cha27se · Post by **Cha27se** » Mon Mar 15, 2010 12:52 am

ok here is the last run i did, http://www.speedyshare.com/files/21415565/long_run.kdl

Cha27se · Post by **Cha27se** » Tue Mar 16, 2010 7:21 pm

keto06 · Post by **keto06** » Tue Mar 16, 2010 8:45 pm

heres ur bump

Cha27se · Post by **Cha27se** » Wed Mar 17, 2010 9:53 pm

ooo that one seems good, knocked a few times. That was just a third gear pull