MSD Distributor + Hondata S300

jdm97r · Post by **jdm97r** » Sat Mar 06, 2010 11:51 pm

Hi Guys,

Does anyone ever had problems with the msd distributor connected to an S300?
My car shut off with these 2 connected together.
It revs to 4000rpm only sometimes
Then I put back the stock dizzy and everything back to normal

Any help please
On the datalog it doesn t show nothing
Thanks

Post by **Spunkster** » Mon Mar 08, 2010 10:56 am

We have found that the stock ignition system is best and capable of supporting up to 1000 hp. Many people experience problems with aftermarket ignition systems.

jdm97r · Post by **jdm97r** » Mon Mar 08, 2010 10:07 pm

Spunkster wrote:We have found that the stock ignition system is best and capable of supporting up to 1000 hp. Many people experience problems with aftermarket ignition systems.

So you are saying,that there is nothing I can do,to make the Dizzy work with the S300?

fly_n · Post by **fly_n** » Tue Mar 09, 2010 4:44 am

Basically he is saying,why downgrade your ignition system when u have a perfectly fine,working stock system there which u mention.

jdm97r · Post by **jdm97r** » Wed Mar 10, 2010 6:32 am

I need a direct answer, There is something I can do to make them work together or not?

Post by **Hondata** » Wed Mar 10, 2010 9:27 am

The MSD distributor is not giving the correct signal. Normally you only see this once the engine goes over 9000 rpm, and then it will rev limit.

There is nothing in the Honda ECU or S300 which can be changed to 'fix' the bad signal.