tunning h22a7

[h22a7-crx]

hello
may somebody help me ?
i have a h22a7( complet wires ,lsd ) engine installed to crx .
-stock h22a7 red head written on the block: 1000026 ,H M, on the head 3v82200194 , 98 , 1A ,PDE
- s3oo + harmness in order to change obd1 to obd2
-walbro fuelpump
-HKS air filter
- h22a7 basmap
I had a prblm withthe Idl =FIXED
also it shows that there is a knock
DISPLAY (when start up ) :RPM~670 , MAP= -20.7 , INJ = 2.52 , DUTY =1
ICN =17 , IAT =83f ,ECT =144f ,TPS =0% ,K Retard =4 , K level=5 .
plz take alook to my first run ( sry its to short coz dont want to blow off my engine :{ )
ur help is highly appreciated
thank u in advance

prlm is : my caris runinng bad

[h22a7-crx]

hey
any help?!!!!!!!!!!!!!!!!!!!

[Zaa-MidwAy]

U should to check map sensor.I think wrong setting.

[h22a7-crx]

ok v good :D
as a first step
i'll check the map sensor
thank u

[h22a7-crx]

hey checked the map sensor = working . discoved an air leak from idle = fixed :) and adjust the parameters well, but every start up the RPM = 500 whet it warms up its OK RPM=900.
-it might be from o2 sensor ?
-or have to adjust the starting temp from the ECU ?
thx ;)