K20a2 running RBC/Mani/CAI/2.5" System..
K20a2 running RBC/Mani/CAI/2.5" System..
hi need a base map for rbc with gasket, dc sports header, 2.5 exhaust no cat, aem cai and lightend flywheel. cheers chris
Use this map.
download.php?id=2692
That was a TUNED map that was made for intake. dc race header, exhaust and RBC. It will be safer than the CAI calibration and make more power.
Make sure and get a good datalog with a good WOT 3rd gear pull and post it up so we can make sure its safe.
Also make sure to no roll on the throttle or use any gear but 3rd.
I recommend shifting to 3rd, letting the rpms fall down below 2000, then punching it WOT till redline (8300 +/-300rpm)
Also do some daily driving and make sure to disable Closed Loop when you do it.
download.php?id=2692
That was a TUNED map that was made for intake. dc race header, exhaust and RBC. It will be safer than the CAI calibration and make more power.
Make sure and get a good datalog with a good WOT 3rd gear pull and post it up so we can make sure its safe.
Also make sure to no roll on the throttle or use any gear but 3rd.
I recommend shifting to 3rd, letting the rpms fall down below 2000, then punching it WOT till redline (8300 +/-300rpm)
Also do some daily driving and make sure to disable Closed Loop when you do it.