erasing recorded / dataloged data?

[zreuan]

Is there anyway to erase recorded / dataloged data without closing and reopining the calibration. I know you can stop and start them and they go away when you reopen the calibration but clearing them would be much faster and less likely to loose your place. For instance when im using that specifick tab to change the fuel cells, and restart the recording the old values stay and i would either have to stay in that cell range for a long time for it to avereage the change or i could erase and see the fruits of my labor rite away. If this is not makeing anysence let me know, Thanks in advance.

[Spunkster]

Go to the datalog menu and select the datalog you want to close, then go back to the datalog menu and click on close.

[zreuan]

I dont mean when your looking at the datalogs that are recorded, im looking more for when your hooked up real time with a laptop. I guess what im saying is can there be a button added next to the start/ stop dataloging that will clear the data in the (shift+f2) screen. Thank you

[XPEHODATA]

Ctrl-L