K20a2 running RBC/Mani/CAI/2.5" System..

K-Series Programmable ECU Calibration updates / downloads
Post Reply
chrisl881
Posts: 5
Joined: Mon Feb 08, 2010 10:47 am
Location: birmingham

K20a2 running RBC/Mani/CAI/2.5" System..

Post by chrisl881 »

hi need a base map for rbc with gasket, dc sports header, 2.5 exhaust no cat, aem cai and lightend flywheel. cheers chris
keto06
Posts: 507
Joined: Fri Jul 17, 2009 9:29 pm

Post by keto06 »

is it a shorty header or race header?
chrisl881
Posts: 5
Joined: Mon Feb 08, 2010 10:47 am
Location: birmingham

Post by chrisl881 »

sports header
chrisl881
Posts: 5
Joined: Mon Feb 08, 2010 10:47 am
Location: birmingham

Post by chrisl881 »

race header
zectr
Posts: 9
Joined: Sun Nov 02, 2008 3:46 pm

Post by zectr »

hi start with k20a2-rsx-coldair is the best map for start up
keto06
Posts: 507
Joined: Fri Jul 17, 2009 9:29 pm

Post by keto06 »

Use this map.

download.php?id=2692

That was a TUNED map that was made for intake. dc race header, exhaust and RBC. It will be safer than the CAI calibration and make more power.

Make sure and get a good datalog with a good WOT 3rd gear pull and post it up so we can make sure its safe.

Also make sure to no roll on the throttle or use any gear but 3rd.

I recommend shifting to 3rd, letting the rpms fall down below 2000, then punching it WOT till redline (8300 +/-300rpm)

Also do some daily driving and make sure to disable Closed Loop when you do it.
96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

I have a mapping that was tune for my 04 k20a2 with karcepts CAI,race header 2.5 catback exhaust and RBC with IMG...if your interested in trying it out...it made 213hp to the wheels...let me how it works out for you..
You do not have the required permissions to view the files attached to this post.
96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

if someone took my mapping and tuned it better let me know..
gigaCTR
Posts: 34
Joined: Fri Apr 24, 2009 3:31 pm

Post by gigaCTR »

@96integra
not to sound mad, but is this cam table any good? made by dyno?
please explain that i dont get it.
keto06
Posts: 507
Joined: Fri Jul 17, 2009 9:29 pm

Post by keto06 »

His map most likely will not make as much power as mine. The cam angles are a lot closer to stock and therefore will most likely make less power.
96integra
Posts: 55
Joined: Thu Feb 18, 2010 9:52 am
Location: madison,wi

Post by 96integra »

yea i dont think the guy was tuning the cam table so he left it more stock...but hey like i said can someone take my map and tune it better for me then? and also how much power does your map make keto?
Post Reply