Hey guys,
Im trying to upload the StockusP72 calibration or any calibration but it wont let me upload as it is coming up with the message 'failed to upload, please try again'
I have also tried a different laptop which difinitely works with Smanager.
Its a P72 ECU with S300
1994 Integra GSR B18C
It did upgrade its firmware but cant upload ever since or reinstall firmware.
It shows its online aswell, the actual ecu has a solid red light if that helps
Any suggestion as it is annoying me now as I cant use the Hondata S300
S300 Upload Issues
Re: S300 Upload Issues
i have this exact issue. i can access the ecu and update my name and information but i will receive my socket tester tomorrow and make sure the socketting is correct then if not i will be making a thread about my concern but i have the same p72 ecu was virgin before i soldered it.. and i have a 1994 gsr b18c1
Re: S300 Upload Issues
From Help, about, what version of software are you using?
Re: S300 Upload Issues
Hey names jay.The computer is no good (s300) I have the same problem. You gotta open up the hondata n check it there are two boards.they have the big board on the bottom n one on top of it that's about a quarter of the main bored.the problem is that the redencer goes bad quick I bought 3 hondatas to fined this out.The red light meaning its going into safe mode witch can really mess up ur car.get it fix asap.Green light is good u already know