Stock calibration?

vkendea · Post by **vkendea** » Thu Dec 10, 2009 9:11 am

Hello to everybody, I am a new user of Hondata Flashpro!
I was wondering how I can download the existing stock calibration from the ECU to my laptop, so I can be able to restore it at any time.
Is this possible?

XSRCivic · Post by **XSRCivic** » Thu Dec 10, 2009 9:17 am

When you unlock the FlashPro from the ECU it restores the original ECU calibration.

You cannot save your original calibration with FlashPro.

Gernby · Post by **Gernby** » Thu Dec 10, 2009 10:20 am

Are you sure that unlocking the FlashPro restores the "original" calibration? That would be nice, but I thought it would simply apply the FlashPro's "Stock Equivalent" calibration.

Post by **Spunkster** » Thu Dec 10, 2009 10:53 am

WHen you click on "New Calibration" you will see the option for return to stock. That is the stock calibration.

vkendea · Post by **vkendea** » Fri Dec 11, 2009 4:10 am

Thank you, that was clear!
There is a misunderstanding with the .fpcal filenames for FN2...
So, Civic-Si-RSP-9-RTS.fpcal is the stock calibration of the FN2 or is equivalent to stock and maybe they are some deference with them?

Post by **Hondata** » Fri Dec 11, 2009 10:38 am

Return to stock = stock calibration, factory calibration.

Stock equivalent = just that

jeremy0203 · Post by **jeremy0203** » Fri Dec 11, 2009 1:31 pm

Hondata wrote:Return to stock = stock calibration, factory calibration.

Stock equivalent = just that

why are the CVN's of your guys' stock calibrations different than hondas then? That means yours arent exactly the same, which also means it is detectable by honda.