remote start with flashpro????

06_civic_si_gi · Post by **06_civic_si_gi** » Wed Oct 28, 2009 9:22 am

I need to know if anyone has had a problems installing remote start with flashpro on there car? I have an 09 civic SI that wont remote start will that have anything to do with flashpro.

thanks

redk20simia · Post by **redk20simia** » Wed Oct 28, 2009 10:22 am

you cant remote start without the key in the car

Post by **Hondata** » Thu Oct 29, 2009 7:38 am

The FlashPro reflashes the stock ECU. It does not change any of the wiring or external behaviour of the ECU which may affect an after market remote start. If you want to eliminatethe FlashPro as a factor then upload a return to stock flash.

Sven · Post by **Sven** » Fri Oct 30, 2009 7:21 am

Running a 2205 AstroStart in my 09 Si with FlashPro. No problems at all. Who installed your remote start/what brand is it?

06_civic_si_gi · Post by **06_civic_si_gi** » Fri Oct 30, 2009 10:39 am

viper and the shop i work at..... its the 5902 hd alarm with remote start.

all-black · Post by **all-black** » Fri Oct 30, 2009 12:24 pm

make sure the inobilizer is being de activated properly by the dei
556u or whatever device ur using sometime placment of the ring that goes around the imobilizer is touchy. also make sure the cranking time on the remote start is set long enough to start the car. also that u use voltage sense so that the remote start knows when the car has started.

maiku · Post by **maiku** » Tue Nov 10, 2009 10:44 pm

Mine works fine with the remote start. I had remote start first then added flashpro. No problems.
Did the remote start ever work or did you only have it with flashpro? If it never worked then consult your installer.