Okay so I picked this car up a few months ago. For a month everything was awesome, 2,000 miles on the motor 421 whp on the soft tune. Then one of the walbro 255's went out (running full blown double pump). Replaced the faulty pump, replaced the fuse which was blown with it and the car is still running like crap. Heres a data log with the car warming up and a cruise up to highway speeds shifting at about 3k when it bogs and leans out. Its a b20 block, sleeved, forged 9:1, b16 head basically all skunk2 inside, 14 lbs of boost. I'm new to boosted hondas just knew all motor previous to this car. If anyone has some input it will be greatly appreciated, or if any more info is needed let me know im going crazy over this!
Heres the a link to my data log, the forum wouldn't let me upload it.
http://www.speedyshare.com/620630643.html
Car bogging/leaning out around 3k rpm
s300 and SManager software questions & answers
Jump to
- General
- ↳ Hondata News
- ↳ Applications
- ↳ Non-Hondata
- s100/s200/s300
- ↳ s300 / SManager
- ↳ S300 Calibrations
- ↳ SManager Display Templates
- ↳ s100/s200
- ↳ Romeditor 4 Software
- ↳ HondaLogger Software
- ↳ Coil Pack Retrofit
- K-Series
- ↳ K-Pro / KManager
- ↳ K-Pro Calibrations
- ↳ KManager Display Templates
- ↳ K-Series Reflash
- FlashPro
- ↳ FlashPro Manager
- ↳ FlashPro Calibrations
- ↳ Accord 2008+ FlashPro
- ↳ Civic Si 2006-2011 Americas
- ↳ Civic Si 2012-2015 US/Canadian / 2013+ ILX
- ↳ Civic Type R 2006-2010 Japanese FD2
- ↳ Civic Type R 2007-2011 European FN2
- ↳ Civic Type R 2015+
- ↳ Civic 2016+ 1.5 Turbo Americas/Asia
- ↳ CRV 2017+
- ↳ CR-Z 2010-2012 US/Europe/Asia
- ↳ Fit 2007-2008
- ↳ RDX 2007-2012
- ↳ S2000 2006-2009 Americas/Europe/Asia
- ↳ TL 2007-2008
- ↳ TSX 2004-2014
- Traction Control
- ↳ General / Traction Control Manager Software
- ↳ Traction Control with S300
- ↳ Traction Control with KPro
- ↳ Traction Control with FlashPro
- Bluetooth Mobile Apps
- ↳ Hondata Mobile