Hey I have a base tune from my tuner and a final tune.
However when I load my final tune the fan stays on constantly with the key in the ignition.
This goes away if I load the Hondata KW tune or the base tune.
Please have a look at the kals. The fan is set on at 168 degree on both kals.
Problem with Fan always on (MY06+ S2000)
Problem with Fan always on (MY06+ S2000)
You do not have the required permissions to view the files attached to this post.
-
jamesandrew58
- Posts: 45
- Joined: Sat Apr 11, 2009 11:49 am
- Location: Lihue, Kauai
It doesnt matter what I set it to in the final tune. It will still run when the key is in and the ect is only 100 degrees or less.Spunkster wrote:the fan is set to come on too early. change it to 190 or 195.
Like i said the fan only kicks in at 168 on the base tune. which is how i would like it on my final tune.
I set it to 168 to match my lower temp thermostat.
So you see no other problems with the kal?
We also advise against using colder thermostats.
http://www.hondata.com/forum/viewtopic.php?t=9845
Post your calibration and a datalog showing the problem.
http://www.hondata.com/forum/viewtopic.php?t=9845
Post your calibration and a datalog showing the problem.