S2000 Gear Ratio Calcs

0piston · Post by **0piston** » Wed Jul 08, 2009 5:13 pm

Hi which is the accurate setting? when I load new calibration for the 2000-2003 s2000-ap1.kal the gear comp looks like this:

3.266 2.130 1.517 1.212 0.972 0.780 4.764

when I click "select ratios" button for s2000 00-03 it is different:

3.133 2.045 1.481 1.161 0.979 0.810 4.756

And when I tried to confirm researching the web for the drivetrain ratios they were different once again, which are the right settings?

thanks

0piston · Post by **0piston** » Tue Jul 14, 2009 3:43 pm

can anyone confirm?

Garrett_si · Post by **Garrett_si** » Tue Jul 14, 2009 3:51 pm

AP1 6-speed, close-ratio Primary Gear Reduction - 1.160 1st gear - 3.133 2nd gear - 2.045 3rd gear - 1.481 4th gear - 1.161 5th gear - 0.970 6th gear - 0.810 Reverse - 2.800 Final Drive - 4.10 with Torque-Sensing Limited-Slip

AP2 6-Speed Transmissions Gear Ratios: Primary Gear Reduction - 1.208 1st gear - 3.133 2nd gear - 2.045 3rd gear - 1.481 4th gear - 1.161 5th gear - 0.942 6th gear - 0.763 Reverse - 2.800 Final Drive Ratio - 4.100

DC5RK20A · Post by **DC5RK20A** » Sat Jul 18, 2009 3:44 pm

Those gear ratios look like the 5R Teggy if I am remembering correctly.