newbie s300 questions (99 civic si/ex)

drummerdude · Post by **drummerdude** » Fri Jul 17, 2009 10:55 am

Hey guys, I'm a bit of a newbie when it comes to engine management and hondata, I have a couple questions I hope someone can answer for me.

Q#1) what, if any, functions will I lose going from obd2b ecu to an obd1 s300?

Q#2) in the display of the Smanager, do I need to buy an aftermarket a/f / lamba contoller/gauge to see the a/f in the display?

Q#3) is there a way to see oil pressure and oil temp in the display? if so what do I need to do to hook it up?

thanks for the help.

Post by **Spunkster** » Fri Jul 17, 2009 11:38 am

drummerdude wrote:Hey guys, I'm a bit of a newbie when it comes to engine management and hondata, I have a couple questions I hope someone can answer for me.

Q#1) what, if any, functions will I lose going from obd2b ecu to an obd1 s300?

Q#2) in the display of the Smanager, do I need to buy an aftermarket a/f / lamba contoller/gauge to see the a/f in the display?

Q#3) is there a way to see oil pressure and oil temp in the display? if so what do I need to do to hook it up?

thanks for the help.

Q#1 - You won't loose anything but the OBD2 scan tool compatibility.

Q#2 - Yes you need an aftermarket wideband and controller to be able to datalog proper AF ratios.

Q#3 - http://plxdevices.com/sensormodules.html You can use the analog inputs in the smanager software.

drummerdude · Post by **drummerdude** » Fri Jul 17, 2009 12:28 pm

you are my hero. thanks for the quick replies, this forum is already made me feel more at home by leaps and bounds in my first day here, than I have at h-t in over a year. thanks again.

drummerdude · Post by **drummerdude** » Fri Jul 17, 2009 12:35 pm

Spunkster wrote: Q#1 - You won't loose anything but the OBD2 scan tool compatibility.

Q#2 - Yes you need an aftermarket wideband and controller to be able to datalog proper AF ratios.

Q#3 - http://plxdevices.com/sensormodules.html You can use the analog inputs in the smanager software.

one more question:

is it possible to see, and datalog egt and a/f while using the analog inputs for oil pressure and oil temp?

basically is it possible to hook up oil temp, oil pressure, egt, and a/f using plx modules into the s300 without losing any other functions?

Post by **Spunkster** » Fri Jul 17, 2009 2:00 pm

http://www.hondata.com/help/smanager/se ... sub=analog

http://www.hondata.com/help/smanager/wi ... b=wideband

drummerdude · Post by **drummerdude** » Fri Jul 17, 2009 5:03 pm

so is it possible to have egt oil press, oil temp, and a/f all going into the s300 without losing any other functions?

drummerdude · Post by **drummerdude** » Fri Jul 17, 2009 5:15 pm

is there enough inputs for egt, a/f, oil pressure, and oil temp??

Post by **Spunkster** » Mon Jul 20, 2009 9:57 am

You can to the Af and 2 of the others through the Analog Inputs.

drummerdude · Post by **drummerdude** » Mon Jul 20, 2009 3:20 pm

ok, so I'll have to give up one of my oil gauges then.

Hondata

newbie s300 questions (99 civic si/ex)

newbie s300 questions (99 civic si/ex)

Re: newbie s300 questions (99 civic si/ex)

THANKS

Re: newbie s300 questions (99 civic si/ex)