Cranny, can you please take a look?

K-Series Programmable ECU Calibration updates / downloads
Locked
HELLRAZR
Posts: 33
Joined: Sun Oct 21, 2007 1:26 pm
Location: Beirut, Lebanon

Cranny, can you please take a look?

Post by HELLRAZR »

here's a data log, i car is running a little rough and it's knocking a bit specially when it's in a higher gear with low rpm on slight ramp. i couldn't do the 4th gear run because the clutch was slipping for some reason, but it's only slipping in 4th 5th and 6th gear.


thanks man
You do not have the required permissions to view the files attached to this post.
cranny
Posts: 488
Joined: Sat Feb 23, 2008 9:58 pm

Post by cranny »

dude , that datalog is useless. i need a longer datalog please.
HELLRAZR
Posts: 33
Joined: Sun Oct 21, 2007 1:26 pm
Location: Beirut, Lebanon

Post by HELLRAZR »

Got the clutch and flywheel replaced and here's the datalog, there's no more knock, but i remember you telling me that the tune still needed some work...

thanks
You do not have the required permissions to view the files attached to this post.
cranny
Posts: 488
Joined: Sat Feb 23, 2008 9:58 pm

Post by cranny »

still looks pretty good. load this on and give me another datalog buddy.
You do not have the required permissions to view the files attached to this post.
Locked