Wall at 3000rpm

K-Series Programmable ECU installation questions / support issues
Locked
Mike B
Posts: 5
Joined: Sat May 02, 2009 9:10 pm
Location: Tyler, TX

Wall at 3000rpm

Post by Mike B »

I have:

1) K24a1/K20a2
2) RBC manifold / RDX 410 injectors
3) Brian Crower Stage 2 cams
4) Basic Boltons
5) Hybrid Racing Race harness. - this is the only harness in my race car
In idle. out of gear, I can rev past 3000rpm. My knock count seems to not exist.

Idle AF ratios are 20+.

When I engage the car in gear, I cannot drive past 3000rpm, it sputters, AF ratios are above 20+. The engine was purchased from a local but the tune was sent to me by the tuner. Everything is the same except the injectors which I have changed to 410, from 270. General Fuel trim is 35 and startup fuel trim is 20. Changing either doesnt make a difference.

However, my KPRO manager states that 02 Voltage is 0.00 at ALL times. I have never seen that number move. I imagine that is a bad 02 sensor?

Whats the problem?

EDIT: I am not getting any error codes either.
User avatar
Spunkster
Site Admin
Posts: 23878
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

You need to take this to a tuner to be properly tuned before you damage the engine.
Mike B
Posts: 5
Joined: Sat May 02, 2009 9:10 pm
Location: Tyler, TX

Post by Mike B »

I appreciate the advice. I havent driven it for this sole reason. I am replacing the 02 sensor in the mean time because the last thing I want to do is get there, to find out a part is bad. The car needs to be 100% before it gets in the hands of the tuner, T1.

Spunkster, anything else other than the tune? If so, Im replacing it, Im not trying to skimp by.
User avatar
Hondata
Site Admin
Posts: 10615
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

Follow the posting guidelines. http://www.hondata.com/forum/viewtopic.php?t=3629

I think you have multiple problems.
Hondata
Locked