Would these ECUs work?

Andros · Post by **Andros** » Mon Feb 09, 2009 1:30 pm

Hey guys,

I just got this 2 ECUs from a friend which he got collecting dust. He said that both were "tuned" but I opened them and didn't see any type of chip soldered on them so I'm guessing they are stock.

Would any of these work with an s300?

P2P-A31

P08-902

Thanks!

Post by **Spunkster** » Mon Feb 09, 2009 3:52 pm

The first picture is an OBD2 ecu and cannot be used. The second ecu (P08) can be used, but only with an s300j. The s300 will not fit in a JDM ecu.

Andros · Post by **Andros** » Tue Apr 14, 2009 8:21 pm

Cool, but is the P08 already socketed or is it stock?

Post by **Hondata** » Wed Apr 15, 2009 8:10 am

The P08 has been socketed.

Garrett_si · Post by **Garrett_si** » Wed Apr 15, 2009 5:56 pm

The P08 is socketed, and it's an Automatic ECU

it doesn't matter either way

Andros · Post by **Andros** » Wed Apr 15, 2009 8:53 pm

But it'll work on a MT car, right?

Garrett_si · Post by **Garrett_si** » Thu Apr 16, 2009 3:32 am

Andros wrote:But it'll work on a MT car, right?

yes

Andros · Post by **Andros** » Thu Apr 16, 2009 8:48 am

Thanks guys!