calibration similar to hondata #4 reflash - Hondata

calibration similar to hondata #4 reflash

Locked

5 posts • Page 1 of 1

jamesandrew58: Posts: 45; Joined: Sat Apr 11, 2009 11:49 am; Location: Lihue, Kauai

calibration similar to hondata #4 reflash

Post by jamesandrew58 » Sat Apr 11, 2009 11:54 am

is there one out?

Hondata: Site Admin; Posts: 10615; Joined: Thu Aug 15, 2002 12:13 pm; Location: Torrance, CA; Contact:
Contact Hondata

Website

Post by Hondata » Mon Apr 13, 2009 7:59 am

k20a2-stock-tuned.kal

Hondata

jamesandrew58: Posts: 45; Joined: Sat Apr 11, 2009 11:49 am; Location: Lihue, Kauai

Post by jamesandrew58 » Mon Apr 13, 2009 2:42 pm

the motor i bought came with 550cc injectors. if i wanted to use the k20a2 stock tuned kal, all i would have to do is change the injector size from 310 to 550?

Spunkster: Site Admin; Posts: 23878; Joined: Fri Sep 20, 2002 5:06 pm; Location: Hondata

Post by Spunkster » Mon Apr 13, 2009 3:08 pm

you will have to do that as a starting point, but then you will have to tune the air fuel ratio everywhere to make sure it is safe.

jamesandrew58: Posts: 45; Joined: Sat Apr 11, 2009 11:49 am; Location: Lihue, Kauai

Post by jamesandrew58 » Tue Apr 14, 2009 4:57 am

thanks!

Locked

5 posts • Page 1 of 1

Return to “K-Pro Calibrations”