Boost Control

rkhan · Post by **rkhan** » Thu Feb 26, 2009 7:36 pm

Hi

Quick Question

What are the dimensions of the muffler on the solenoid, as I am trying to source one .

92hondalude · Post by **92hondalude** » Sun Mar 01, 2009 9:58 am

how do i know if my s300 has the boost option on it? i have had it since it came out and for some reason i think it doesnt have it on there.

Post by **Spunkster** » Mon Mar 02, 2009 11:13 am

1/8" NPT

All S300s can operate boost control...it is a software setting. However, the ECU must have components added for it to work.
http://www.hondata.com/help/smanager/bo ... st+control

stedciv · Post by **stedciv** » Sat Mar 07, 2009 7:06 pm

ok so i played around with my boost control settings a little bit today

when i set the fixed duty cycle at 35 i get 14lbs of boost
when i set it to 10 i get 12lbs.

i want to get this put in the pressure vs duty cycle so i can run boost by gear. which values will i change? the pressure or the duty cycle?

will i use negative values if i want to set it to 7lbs for 1st and 10 for 2nd since i am getting 12lbs at just 10% on fixed?

Post by **Spunkster** » Mon Mar 09, 2009 9:34 am

You enter both the duty cycle % and the boost level. You cannot enter negative numbers unless you have a Delorean and a flux capacitor.