o2 sensor error, anyway to disable the error code

devilz · Post by **devilz** » Thu Nov 27, 2003 7:09 pm

When I go off throttle at sometimes I get the O2 sensor error poping up,, only at off throttle driving at high revs, the tune is pretty perfect at normal driving, and the error only comes up once in a while.
Anyway of disabling this error?? or what parts of the tune should I be looking at altering to solve this problem (or is it just a falty sensor or just a rich/lean problem at off throttle?)
o2 is running is open loop mode, so i didnt think it would be reading any of the O2 readings anyway?

devilz · Post by **devilz** » Thu Nov 27, 2003 7:12 pm

its a P08 Ecu (S200 hondata) in a 92 prelude, turbo (odb1 model, no need for any harness)
incase that info helps...

APZGSR · Post by **APZGSR** » Mon Dec 01, 2003 10:25 pm

your problem is that afther the tunnig you have to put it in close loop but the millibars for that to read is like 100mlbars that way you don't get the mil.

that hapen to me to and took me a some time and an o2 to solved.