KPRO or Reflash Euro Accord k24

KarsJDM · Post by **KarsJDM** » Fri Nov 21, 2008 8:16 am

Hi

I'm from spain and i own a Honda Accord 2.4L (k24 engine) that is like the Acura TSX from US.

I would like to know if i can use a reflash or a KPro with my car? The only difference i found betwen Accord/TSX is that the intake throttle body from the TSX is by cable and the one from the Accord is electric...

Actually my car have been modified with TODA racing headers, HKS exhaust, Ogura Stage 2 clutch kit, Gruppem intake, Tein Monoflex, Cusco strut bar, etc.., and now i want to modifie ECU to adjust all. Now my Accord at DYNO gives 213HP (from base 190hp).

Thanks for all and excuse me for my poor english

Post by **Hondata** » Fri Nov 21, 2008 8:29 am

Sorry, the reflash will not work. The only difference (drive by wire) is a fairly big difference.

KarsJDM · Post by **KarsJDM** » Fri Nov 21, 2008 8:58 am

Hondata wrote:Sorry, the reflash will not work. The only difference (drive by wire) is a fairly big difference.

Ok Thanks, so there nothing to do with my ecu :( , do you know if in the future you will have something for the Euro Accord?

Thanks again, Regards

KarsJDM · Post by **KarsJDM** » Thu Nov 27, 2008 9:06 am

Hi,

Do you know if i adapt an EP3 intake trottle, cable and pedal, the K-Pro or reflash will work with my Accord?

Thanks

sass · Post by **sass** » Fri Nov 28, 2008 12:04 am

KarsJDM wrote:Hi,

Do you know if i adapt an EP3 intake trottle, cable and pedal, the K-Pro or reflash will work with my Accord?

Thanks

Can you send me shot of inners of your ECM Accord
Honda 37820-RBB-E05 Control module, engine
Honda 37820-RBB-E57 Control module, engine

KarsJDM · Post by **KarsJDM** » Thu Dec 18, 2008 9:57 am

sass wrote:
KarsJDM wrote:Hi,

Do you know if i adapt an EP3 intake trottle, cable and pedal, the K-Pro or reflash will work with my Accord?

Thanks
Can you send me shot of inners of your ECM Accord
Honda 37820-RBB-E05 Control module, engine
Honda 37820-RBB-E57 Control module, engine

Sorry for later in reply, but i have been out for holidays :oops:

I will send you the shots you ask for

Thanks for your time

Regards

KarsJDM · Post by **KarsJDM** » Tue Dec 23, 2008 9:55 am

sass wrote:
KarsJDM wrote:Hi,

Do you know if i adapt an EP3 intake trottle, cable and pedal, the K-Pro or reflash will work with my Accord?

Thanks
Can you send me shot of inners of your ECM Accord
Honda 37820-RBB-E05 Control module, engine
Honda 37820-RBB-E57 Control module, engine

Hi,

Here is the reference of my ECM

HONDA 37820-RBB-E02 Control module, engine

I will try to make some photos

Kind Regards