tuning using the nitrous controll

Hondata installation questions / answers / issues.
Locked
philipwight
Posts: 5
Joined: Thu Oct 30, 2003 10:37 pm

tuning using the nitrous controll

Post by philipwight »

Has anyone done this? I am going to try but i am a little lost on what kind of air to fuel ratio to set a target on. Any help would be great.

Thanks
QUICKSILVER RACING
Posts: 310
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

Post by QUICKSILVER RACING »

Read their tech about Nitrous control. It might be of help
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747
philipwight
Posts: 5
Joined: Thu Oct 30, 2003 10:37 pm

Post by philipwight »

so is nos systems considered a non-boosted application even though it is a power adder? Thank you for that info.
QUICKSILVER RACING
Posts: 310
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

Post by QUICKSILVER RACING »

TO be politically correct. When you look at your vacuum gauge there is no boost when you hit NOS. It is a power adder though.
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747
philipwight
Posts: 5
Joined: Thu Oct 30, 2003 10:37 pm

Post by philipwight »

i think i am going to go with a 12 to 1 af ratio.
QUICKSILVER RACING
Posts: 310
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

Post by QUICKSILVER RACING »

TUNE the NA part first. 12.5: - 13:1 should be fine. Then tune the nitrous. 12:1 is a bit rich for my taste but should just fine.
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747
Locked