Nitrous wiring problem

mron0903 · Post by **mron0903** » Fri Oct 17, 2008 11:31 am

Ok i finally got around to wiring my nitrous to my S300 and so far it hasn't worked. This is how i wired it up....

and this is from hondata's web site, and from this I see that 85 and 86 are switched from how i wired mine... Would this be the problem? Or should it still work?

Post by **Spunkster** » Fri Oct 17, 2008 12:09 pm

You must wire it exactly as we have shown in the diagram. If you change it, it will not work.

mron0903 · Post by **mron0903** » Fri Oct 17, 2008 1:11 pm

on hondata's diagram it says 12v switched, what does that mean? Do i splice those two wires together and put to a 12v source?

Post by **Spunkster** » Fri Oct 17, 2008 1:57 pm

There is switched 12v power in the fuse box. Using a multimeter you can find the spot that only gets 12v when you turn the key to the on position.

mron0903 · Post by **mron0903** » Fri Oct 17, 2008 3:20 pm

ok cool, I got it to work finally! Just one quick question, does it matter if you invert the output (A20) cause i tried both ways and the solenoid still click on either way.