Using switch to engage datalogging

SPOOLIN · Post by **SPOOLIN** » Wed Sep 17, 2008 7:55 pm

how do you setup the use of the AC pin for enabling datalogging. I want to use a switch to start it, but not the AC switch. Do i just set the switch up to ground that pin?

Too_smooth · Post by **Too_smooth** » Wed Sep 17, 2008 8:03 pm

One lead of the switch to the ecu and the other to ground.

SPOOLIN · Post by **SPOOLIN** » Thu Sep 18, 2008 8:49 pm

so you are answering my question as simply being, i just have to ground that pin to make it start data logging using a switch.

Too_smooth · Post by **Too_smooth** » Mon Sep 22, 2008 1:26 pm

Yes, that's all I have done for my three switches.