DONE: JDM DC5 PRC ecu with kpro into Euro EP3

JDMdc5 · Post by **JDMdc5** » Thu Sep 11, 2008 5:13 am

Hey all,

i have a prefacelift JDM DC5 Type-R Ecu with kpro and want it to run in my european EP3.
What do i have to do?

Thank you

Post by **Spunkster** » Thu Sep 11, 2008 9:30 am

http://www.hondata.com/techk20-ctr-o2wiring.html

If you are having problems, contact one of our European dealers for assistance, as they are familiar with these cars.

JDMdc5 · Post by **JDMdc5** » Fri Sep 19, 2008 12:25 pm

News:

To all who have the same problem like me:

You just have to switsch pin e1 to pin e10.than the fuel pump will work.Thats it !
But you have to run in open loop cause the JDM DC5 has a wideband o2 sensor and the Euro EP3 has a narrowband o2 sensor.
OR you have to fit a wideband.
Instructions for this:

http://www.hondata.com/techk20-ctr-o2wiring.html

I hope i could help anybody with this.

Thanks

Marian
www.boosted-imports.eu