k20a2 turbo cal needed

K-Series Programmable ECU Calibration updates / downloads
Locked
}{bLaZe}{
Posts: 3
Joined: Wed Mar 26, 2008 2:43 pm

k20a2 turbo cal needed

Post by }{bLaZe}{ »

i got an 02 type s with a custom turbo kit running around 10psi does anyone have a good cal i could use ? i got a catback exh so..
dustyboner
Posts: 10
Joined: Wed Feb 06, 2008 6:55 am

Post by dustyboner »

you might be able to use this .kal. if your at a low altitude, you may need to increase the overall fuel trim a little.
k20a2 9.0:1 compression
1mm oversized valves
t3/t4 60trim
750cc injectors @ 43psi
3" exhaust, no cat
elevation 5200ft
You do not have the required permissions to view the files attached to this post.
johnpest2
Posts: 1
Joined: Thu Aug 21, 2008 12:00 pm

Post by johnpest2 »

What changes for K24 with 750 cc Wiseco pistons
rods
10.4:1
GT K 61 trim T4

K20A head
Avgas
5300 ft
cranny
Posts: 488
Joined: Sat Feb 23, 2008 9:58 pm

Re: k20a2 turbo cal needed

Post by cranny »

}{bLaZe}{ wrote:i got an 02 type s with a custom turbo kit running around 10psi does anyone have a good cal i could use ? i got a catback exh so..

im sure you could load the 10 psi cybernation map and tune from there. just make sure you change the fuel trim injector size for yours.
}{bLaZe}{
Posts: 3
Joined: Wed Mar 26, 2008 2:43 pm

Post by }{bLaZe}{ »

ok so now i got my car back i got 440cc injectors off club rsx i have eagle rods and mahle low compression pistion i think there 8.6-1 not sure but when i start the car it doesnt wanna idle any ideas and its running rich and when ever i clear security on the ecu it runs but the sensors dont work i guess cuz it runs rich but it idles so i have no idea im still new to this the car has been down for 3 months and im looking for some helpfull advice to getting it back on the road...thanks in advance
cranny
Posts: 488
Joined: Sat Feb 23, 2008 9:58 pm

Post by cranny »

post a datalog of the car starting an running and your calibration.
}{bLaZe}{
Posts: 3
Joined: Wed Mar 26, 2008 2:43 pm

Post by }{bLaZe}{ »

id post one right now but the car wont start we found out the map sensor is bad so the new one should be in today after we put that in well see if it starts and ill post a datalog of the car
Locked