VTEC Pressure light staying on even before VTEC! Problem?
VTEC Pressure light staying on even before VTEC! Problem?
Well I have been datalogging lately and the other day the VTEC Pressure light did not light up until I actually HIT VTEC , the Pressure and Spool lights lit up together. Last Night I satalogged some and the Pressure light stayed on all the time but the SPOOL did not until I actually hit VTEC. No check engine lights at all. I disconnected the VTEC pressure switch and the light on Hondalogger stayed on NO CODES and then the VTEC solenoid of course got a code 22. I watched the Example Datalog from Hondata dn the Pressure stayed on the whole time but the Spool never lit up. I took the VTEC solenoid off and cleaned the filter and checked the solenoid's spring and it seemed fine. I reinstalled and still the same Pressure light stays on. I compared the solenoid to another solenoid I had so it doesnt seem like anything was wrong with it, I guess I could swap these out today and try that. Any ideas?