PND-A08 ECU insetad of PRA [European EP3]

eTiLiKo · Post by **eTiLiKo** » Sat Jul 05, 2008 5:51 am

On a European EP3,that mount from the factory a PRA ECU,can be mounted a PND-A08 ECU with a Kpro on it?I mean without harness mods.
Is it a free-issues operation?
Thanks

eTiLiKo · Post by **eTiLiKo** » Mon Jul 07, 2008 8:32 am

It is sufficent to have the pinout of hte PND-A08,but i havent't it.

Post by **Spunkster** » Mon Jul 07, 2008 10:10 am

This will not work properly without making wiring changes and installing a wideband o2 sensor.

eTiLiKo · Post by **eTiLiKo** » Tue Jul 08, 2008 2:25 am

Ah,ok!
Can you help me with the wiring changes?I already have this ECU with the Kpro on it,so I have to mount it. :roll:
Thanks a lot

Post by **Spunkster** » Tue Jul 08, 2008 9:57 am

http://www.hondata.com/techk20-ctr-o2wiring.html

eTiLiKo · Post by **eTiLiKo** » Tue Jul 08, 2008 3:34 pm

Thanks a lot,I know this page.
I had miseunderstood : I believed that I had to make further changes than those for the o2. :oops:
So,when I make the o2 wiring modify all works fine?

eTiLiKo · Post by **eTiLiKo** » Wed Jul 09, 2008 2:37 am

And another question : the new O2 sensor [36531-PRB-A01] have trhe same connector of the "old" primary narrow?

Post by **Spunkster** » Wed Jul 09, 2008 9:20 am

I believe the connector is the same, but since we do not have these cars in the US I do not know for sure.

eTiLiKo · Post by **eTiLiKo** » Sun Jul 13, 2008 9:46 am

Can be another solution to unsolder Kpro from PND and mount on the PRA?

Garrett_si · Post by **Garrett_si** » Sun Jul 13, 2008 4:27 pm

the k-pro is not soldered

but it couldn't be put into another ecu since the board need modifications

eTiLiKo · Post by **eTiLiKo** » Mon Jul 14, 2008 5:13 am

Yes,i want to say replicating all the necessary mods to the PRA board.

eTiLiKo · Post by **eTiLiKo** » Mon Jul 21, 2008 3:06 pm

Spunkster wrote:I believe the connector is the same, but since we do not have these cars in the US I do not know for sure.

Yes,the connector of the wideband is the same of the narrowband.
I have mounted it and made the mods,the car start with no problem 8)