cycle is high and getting low boost

jbcivic03 · Post by **jbcivic03** » Sat Jun 28, 2008 10:31 pm

I recently hooked up my hondata boost solenoid. Its set on 30% duty cycle and only getting 11.5 psi. Does any body know what the problem would be?

mnjdmek4 · Post by **mnjdmek4** » Sun Jun 29, 2008 6:13 am

are you running the stcok map sensor? you only get about 11psi for the stock map sensor.

When reporting any s300 problems, please include:

- the calibration (as an attachment)
- a datalog of a problem (as an attachment)
- what sort of vehicle you have
- what sort of ECU you are using
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).
- a specific description of the problem

says Admin

jbcivic03 · Post by **jbcivic03** » Mon Jun 30, 2008 12:17 pm

Its currently running a gm 3 bar map sensor. Its p72 ecu. civic with build gsr with sc61 turbo. I would have to see if my tuner can load the calibrations. Dont you find it odd for that cycle number and that much psi out of it?

Post by **Spunkster** » Mon Jun 30, 2008 1:07 pm

Duty cycle all depends on your setup...each car will be different.