converting from OBD0 to OBD1

civicdan · Post by **civicdan** » Sun Sep 21, 2003 7:34 pm

can it be done?? I want to run the s200.

93civicEXT · Post by **93civicEXT** » Mon Sep 22, 2003 10:15 am

Yes it can, contact these people and they should be able to help you out.
RaVer Motorsports (559)733-4711

civicdan · Post by **civicdan** » Mon Sep 22, 2003 10:57 am

Where is raVen Motorsports at Cali or what.

DaX · Post by **DaX** » Mon Sep 22, 2003 11:32 am

Converting the entire car or just the engine? The engine conversion only requires an OBD-1 distributor and computer [with applicable ECU wiring harness], and the OBD-1 wiring harness for the motor.

93civicEXT · Post by **93civicEXT** » Mon Sep 22, 2003 11:42 am

They are located in California.

shinociv · Post by **shinociv** » Mon Sep 22, 2003 11:17 pm

I converted my 90 Civic SI with a OBD0 B16A to an OBD1

I used a Integra GSR distributor and a OBD0 to OBD1 jumper harness from Locash Racing http://www.locashracing.com/adapters/01.htm

I bought my Hondata setup from them too.

If you want more info let me know,

civicdan · Post by **civicdan** » Sun Nov 09, 2003 12:59 pm

I got the hondata s200 frim Raver motorsports(awsome people). Know i am having a problem with the install. I have a 89 civic running the stock wiring harness. The ecu is a obd1, I have everything installed and have no spark at the plugs???? any hhelp would be gerat. The distributor is a 92-95 non-vtec dist.

Hondata

converting from OBD0 to OBD1

converting from OBD0 to OBD1

re:

re:

OBD0 to OBD1 convertion