S2000 K-Pro 02 sensor high voltage?

Garrett_si · Post by **Garrett_si** » Mon Jun 02, 2008 1:33 am

someone know why after the s2000 k-pro installation the CEL code P0132 02 sensor voltage high light up?

Select 'Use Secondary Oxygen Sensor for Primary'. is done

Post by **Spunkster** » Mon Jun 02, 2008 10:08 am

http://www.hondata.net/forum/viewtopic.php?t=3629

not enough informaiton to give an educated guess

Garrett_si · Post by **Garrett_si** » Wed Jun 04, 2008 5:30 pm

- serial number of your K-Pro : 03003322
- the calibration (as an attachment)
- a datalog of a problem (as an attachment)
- what sort of vehicle you have: S2000 2.2 2004
- what sort of ECU you are using: PRB with S2000 K-pro
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).: no modification that could affect the ecu
- a specific description of the problem : the code P013202 sensor High voltage light up[/b]

Post by **Spunkster** » Thu Jun 05, 2008 9:13 am

That datalog does not show any error codes.

Garrett_si · Post by **Garrett_si** » Thu Jun 05, 2008 3:43 pm

I know it light up before and after the dyno tuning

Garrett_si · Post by **Garrett_si** » Thu Aug 07, 2008 4:10 pm

OK finally the customers datalog it

He datalog it at idle, and the 02 sensor high voltage codes is present

Garrett_si · Post by **Garrett_si** » Mon Aug 11, 2008 8:58 am

What could cause it Spkunster?

Post by **Spunkster** » Mon Aug 11, 2008 10:16 am

What exactly has been done to this car?

Garrett_si · Post by **Garrett_si** » Mon Aug 11, 2008 12:56 pm

the car is completly stock

And I installed the k-pro and tune it

nothing more than that

S2KPRO · Post by **S2KPRO** » Thu Aug 21, 2008 4:59 pm

I am having the same issue except I am boosted with the bolt on Greddy turbo kit...any thoughts as to why this is happening?

Garrett_si · Post by **Garrett_si** » Thu Aug 21, 2008 5:30 pm

I will receive my S2k K-pro next week

I will see if the same thing happen on mine in the next weeks

S2KPRO · Post by **S2KPRO** » Thu Aug 21, 2008 5:50 pm

Garrett_si wrote:I will receive my S2k K-pro next week

I will see if the same thing happen on mine in the next weeks

I thought I had a faulty o2 sensor so I bought a new one and it is throwing the same code as yours.

S2KPRO · Post by **S2KPRO** » Fri Aug 22, 2008 1:23 pm

After a few trips back to my tuner I continue to throw the same code related to the o2 sensor. There is another local Greddy boosted w/K-Pro and the only difference between his set up and mine is the IAT sensor. When he bought his K-Pro it was not required to swap it out, when I bought mine about 1.5 mths ago, Hondata's K-Pro S2000 link on this site added it to their list of additional parts and called for a new one. I am swapping it back on Monday and will see if I have the same problem.

Anyone from Hondata know what may be causing this?

Post by **Spunkster** » Fri Aug 22, 2008 4:14 pm

We are looking into a permanent fix for this and will update you when we have a resolution.

S2KPRO · Post by **S2KPRO** » Fri Aug 22, 2008 7:08 pm

Spunkster wrote:We are looking into a permanent fix for this and will update you when we have a resolution.

Interesting? So this has been a common issue? Will you be notifying us via this thread or an e-mail? When do you think you will have this fix ready?

Do you know why it only seems to be happening with the newer users like myself?

Thanks for responding.