Gauge Temperature problem

[Mcapela]

Hi there
sorry for my question but i'n new in this subjects

i have i European Honda Civic Type-R EP3 with K20A2, i have buyed a few days to replace my OEM ecu a PRB ecu,
i have erase all the ecu and upload the K20A2 civic type-r factory calibration include in CD rom of Kmanager
at here all ok, but after that i have upload a K20A2-RSX-stock and the tunned too calibrations and after that the gauge temperature do not work
somebody can help me ?

thanks

[Spunkster]

What version of software are you using from Help, About?

[Mcapela]

hi there

the version of stware is 1.2.3.5

thanks

[Spunkster]

Try downloading the software again from our website. After installing, go to Online, Tools and clear security. Wen that is done, close the program, reopen it and upload a fresh calibration from File new. Your temp guage should work. This has been tested. The only other reason it would not work is that you may have mis-wired something when changing the wiring for the PRB.

[Mcapela]

Try downloading the software again from our website. After installing, go to Online, Tools and clear security. Wen that is done, close the program, reopen it and upload a fresh calibration from File new. Your temp guage should work. This has been tested. The only other reason it would not work is that you may have mis-wired something when changing the wiring for the PRB.

Hi there

thanks for you quick answer, i'm going try that, but i dont have chanhge nothing in wiring car, i have to change the harness wiring ? what ? can you help me please ?

Another question if you can help

I have buyed the interface to connect my PRB ecu to AIM MXL PISTA
and i have some parameters i can understand the values.
for example for teh HONDATA_SPEED and HONDATA_GEAR the values 80 Km/h and 6 gear engaged but THIS with car stopped in neutral position.
and can you please tell me the values of the Vtec pressures and solenoids ? what are the normal values and abnormal

thanks for all

with my best regards