timing issue......

8112 · Post by **8112** » Mon May 26, 2008 1:58 am

what timing would be recomended for a d16y8 on 20 psi? i have it at .75 retard per pound of boost and it back fires after 10 psi.

HONDA GHANDI · Post by **HONDA GHANDI** » Mon May 26, 2008 6:17 pm

Have you datalogged this issue? Posting the calibration file and datalog will go along way to helping us help you

Post by **Spunkster** » Tue May 27, 2008 10:37 am

This is really only somethign you can safely check and tune on the dyno. Also what works well for one person may not work so well for you and your setup.