EGT Logging

perlmeistere8 · Post by **perlmeistere8** » Sun May 11, 2008 6:11 pm

I see that to log egt's you can use one of the analog inputs (1 or 2) and perform necessary ecu modification. I am running a defi d gauge egt gauge and I was curious if I could T off the sensor wire to run to B6 for datalogging egt's, would this work?

Thanks,

Ben

deafy · Post by **deafy** » Sun May 11, 2008 8:18 pm

i'm in the same situation with the same gauge/sensor. No clue how we'd hook it up and whatnot.

Post by **Spunkster** » Mon May 12, 2008 10:17 am

You cannot just T into the sensor. You must use something like the PLX SM-EGT that has an analog output that you can input the vlaues into the Smanager software.

perlmeistere8 · Post by **perlmeistere8** » Mon May 12, 2008 10:35 am

Spunkster wrote:You cannot just T into the sensor. You must use something like the PLX SM-EGT that has an analog output that you can input the vlaues into the Smanager software.

Thanks for the quick reply and thank you for the work that you do!