PRB K-Pro 'E' Connector Pin 24 RS232TX

SWEliseK20A · Post by **SWEliseK20A** » Sat May 10, 2008 7:47 am

I have just recently bought a K-Pro'd PRB ECU and I would like to connect it up to an AIM MXL Pista Logger/Dash display.

AIM produce something called a Hondata board to interface between the K-Pro and their logger. This communicates via the RS232TX line from Pin 24 on the K-Pro 'E' Connector. I have this Hondata Board, the AIM Logger and a K-PRO PRB ECU as previously mentioned.

Can anyone tell what information I can sample/read via this RS232RX link?

Thanks in advance,

Scott

Post by **Hondata** » Mon May 12, 2008 8:37 am

In the KManager help look up 'serial output'. This should answer your questions on how to enable the output in KManager.

Garrett_si · Post by **Garrett_si** » Mon May 12, 2008 4:52 pm

I Use it on our racing car...